Planning Guide

Side Bath Bulkhead

The side bath bulkheads are designed to extend a run of units.

Back Bath Bulkhead

The back bath bulkhead is designed for cutting to the required size on site and is supplied with a white MFC fascia panel for tiling on site.

Base Units

Use corner unit (code: CBC605). The corner unit needs to be offset 55mm from wall. The adjacent unit needs to be offset 335mm from this wall.

Alternatively, the base/corner open shelf (CBGLOS605) can be pulled out the full 320mm, in which case the 320mm corner post/blanking panel (CBOSBCP) is fixed to the side of the base/corner open shelf.

Wall Units

Units should be offset 235mm minimum. Repositioning the corner post on the blanking panel will allow a maximum offset of 385mm.